The difference between cardless rotary cutter and card rotary cutter

  Rotary cutting machines are generally divided into two types: cardless rotary cutters and card rotary cutters. They are also available in both vertical and horizontal types. The vertical and horizontal general rotary cutting methods are the same!

  Cardless rotary cutting machine: It is to put a certain length of wood into the machine table, and there are roller shafts on the front and rear sides, and the method of rotating the wood is used to achieve the purpose of rotary cutting. However, the cardless rotary cutting machine can only choose small-diameter wood, but the wood must be round. Generally, it can be rotated within 30 cm, and the wooden core is small, and can be rotated to about 3 cm.

  Card rotary cutting machine: It is to put a certain length of wood into the machine table, and there are chucks on both the left and right sides, which can be rotated. The chucks on both sides will squeeze the wood and start to rotate and cut to achieve the purpose of rotary cutting. ! Cards can be used to cut and cut large-diameter wood, and the diameter of 1.3 meters can be, but the minimum of the wooden core is more than 10 cm.